Scenario

This is the reference of the different components available to write scenarios with Gatling.

Bootstrapping

scenario is the way to bootstrap a new scenario.

ScenarioBuilder scn = scenario("Scenario");

val scn = scenario("Scenario")

val scn = scenario("Scenario")

You can use any character in the name of the scenario except tabulations: \t.

Structure Elements

All the components in this section can be either:

attached to a scenario
directly created, so they can be passed as parameters, stored in constants, etc
attached to another component in this section

Exec

The exec method is used to execute an action. Actions are usually requests (HTTP, WebSocket, JMS, MQTT…) that will be sent during the simulation. Any action that will be executed will be called with exec.

For example, when using the Gatling HTTP module you would write the following line:

// attached to a scenario
scenario("Scenario")
  .exec(http("Home").get("https://gatling.io"));

// directly created and stored in a reference
ChainBuilder chain = exec(http("Home").get("https://gatling.io"));

// executed sequentially
exec(
  http("Home").get("https://gatling.io"),
  http("Enterprise").get("https://gatling.io/enterprise")
);

// attached to another
exec(http("Home").get("https://gatling.io"))
  .exec(http("Enterprise").get("https://gatling.io/enterprise"));

// attached to a scenario
scenario("Scenario")
  .exec(http("Home").get("https://gatling.io"))

// directly created and stored in a reference
val chain = exec(http("Home").get("https://gatling.io"))

// executed sequentially
exec(
  http("Home").get("https://gatling.io"),
  http("Enterprise").get("https://gatling.io/enterprise")
)

// attached to another
exec(http("Home").get("https://gatling.io"))
  .exec(http("Enterprise").get("https://gatling.io/enterprise"))

// attached to a scenario
scenario("Scenario")
  .exec(http("Home").get("https://gatling.io"))

// directly created and stored in a reference
val chain = exec(http("Home").get("https://gatling.io"))

// executed sequentially
exec(
  http("Home").get("https://gatling.io"),
  http("Enterprise").get("https://gatling.io/enterprise")
)

// attached to another
exec(http("Home").get("https://gatling.io"))
  .exec(http("Enterprise").get("https://gatling.io/enterprise"))

exec can also be passed a Function.

This can be used for manual debugging or to edit the Session, e.g.:

exec(session -> {
  // displays the content of the session in the console
  // WARNING: DEBUGGING ONLY, NOT UNDER LOAD
  // sysout is a slow blocking output,
  // massively writing in here will freeze Gatling's engine
  System.out.println(session);
  // return the original session
  return session;
});

exec(session ->
  // return a new session instance
  // with a new "foo" attribute whose value is "bar"
  session.set("foo", "bar")
);

exec { session ->
    // displays the content of the session in the console
    // WARNING: DEBUGGING ONLY, NOT UNDER LOAD
    // sysout is a slow blocking output,
    // massively writing in here will freeze Gatling's engine
  println(session)
  // return the original session
  session
}

exec { session ->
  // return a new session instance
  // with a new "foo" attribute whose value is "bar"
  session.set("foo", "bar")
}

exec { session =>
  // displays the content of the session in the console
  // WARNING: DEBUGGING ONLY, NOT UNDER LOAD
  // sysout is a slow blocking output,
  // massively writing in here will freeze Gatling's engine
  println(session)
  // return the original session
  session
}

exec { session =>
  // return a new session instance
  // with a new "foo" attribute whose value is "bar"
  session.set("foo", "bar")
}

Those functions are executed in Gatling’s shared threads, so you must absolutely avoid performing long blocking operations in there, such as remote API calls.

Remember that the Gatling DSL components are merely definitions. They only are effective when chained with other DSL components and ultimately passed to the setUp. In particular, they have no effect when used inside functions.

exec(session -> {
  // just creates a dangling component, doesn't produce any effect
  http("Gatling").get("https://gatling.io");
  return session;
});

exec { session ->
  // just creates a dangling component, doesn't produce any effect
  http("Gatling").get("https://gatling.io")
  session
}

exec { session =>
  // just creates a dangling component, doesn't produce any effect
  http("Gatling").get("https://gatling.io")
  session
}

Pause

`pause`

When a user sees a page he/she often reads what is shown before choosing to click on another link. To reproduce this behavior, the pause method is used.

There are several ways to use it.

Fixed pause takes a single parameter:

duration: can be an Int for a duration in seconds, a duration, a Gatling EL String or a function

// with a number of seconds
pause(10);
// with a java.time.Duration
pause(Duration.ofMillis(100));
// with a Gatling EL string resolving to a number of seconds or a java.time.Duration
pause("#{pause}");
// with a function that returns a java.time.Duration
pause(session -> Duration.ofMillis(100));

// with a number of seconds
pause(10)
// with a java.time.Duration
pause(Duration.ofMillis(100))
// with a Gatling EL string resolving to a number of seconds or a java.time.Duration
pause("#{pause}")
// with a function that returns a java.time.Duration
pause { session -> Duration.ofMillis(100) }

// with a number of seconds
pause(10)
// with a scala.concurrent.duration.FiniteDuration
pause(100.millis)
// with a Gatling EL string resolving to a number of seconds or a scala.concurrent.duration.FiniteDuration
pause("#{pause}")
// with a function that returns a scala.concurrent.duration.FiniteDuration
pause(session => 100.millis)

Uniform random pause takes 2 parameters:

min: can be an Int for a duration in seconds, a duration, a Gatling EL String or a function
max: can be an Int for a duration in seconds, a duration, a Gatling EL String or a function

// with a number of seconds
pause(10, 20);
// with a java.time.Duration
pause(Duration.ofMillis(100), Duration.ofMillis(200));
// with a Gatling EL strings
pause("#{min}", "#{max}");
// with a function that returns a java.time.Duration
pause(session -> Duration.ofMillis(100), session -> Duration.ofMillis(200));

// with a number of seconds
pause(10, 20)
// with a java.time.Duration
pause(Duration.ofMillis(100), Duration.ofMillis(200))
// with a Gatling EL strings
pause("#{min}", "#{max}")
// with a function that returns a java.time.Duration
pause({ session -> Duration.ofMillis(100) }) { session -> Duration.ofMillis(200) }

// with a number of seconds
pause(10, 20)
// with a scala.concurrent.duration.FiniteDuration
pause(100.millis, 200.millis);
// with a Gatling EL strings
pause("#{min}", "#{max}")
// with a function that returns a scala.concurrent.duration.FiniteDuration
pause(session => 100.millis, session => 200.millis)

All those methods also have an optional force parameter that overrides the pause type defined in the setUp. Possible values are the same ones than for global definition.

`pace`

You could want to control how frequently an action is executed, to target iterations per time type volumes. Gatling supports a dedicated type of pause: pace, which adjusts its wait time depending on the elapsed time since the virtual user last reached this action. E.g.:

forever().on(
  pace(5)
    .exec(
      // will be run every 5 seconds, irrespective of what pause time is used
      pause(1, 4)
    )
);

forever().on(
  pace(5)
    .exec(
      // will be run every 5 seconds, irrespective of what pause time is used
      pause(1, 4)
    )
)

forever(
  pace(5)
    .exec(
      // will be run every 5 seconds, irrespective of what pause time is used
      pause(1, 4)
    )
)

There are several ways to use it.

Fixed pace takes a single parameter:

duration: can be an Int for a duration in seconds, a duration, a Gatling EL String or a function

// with a number of seconds
pace(10);
// with a java.time.Duration
pace(Duration.ofMillis(100));
// with a Gatling EL string resolving to a number of seconds or a java.time.Duration
pace("#{pace}");
// with a function that returns a java.time.Duration
pace(session -> Duration.ofMillis(100));

// with a number of seconds
pace(10)
// with a java.time.Duration
pace(Duration.ofMillis(100))
// with a Gatling EL string resolving to a number of seconds or a java.time.Duration
pace("#{pace}")
// with a function that returns a java.time.Duration
pace { session -> Duration.ofMillis(100) }

// with a number of seconds
pace(10)
// with a scala.concurrent.duration.FiniteDuration
pace(100.millis)
// with a Gatling EL string resolving to a number of seconds or a scala.concurrent.duration.FiniteDuration
pace("#{pace}")
// with a function that returns a scala.concurrent.duration.FiniteDuration
pace(session => 100.millis)

Uniform random pace takes 2 parameters:

min: can be an Int for a duration in seconds, a duration, a Gatling EL String or a function
max: can be an Int for a duration in seconds, a duration, a Gatling EL String or a function

// with a number of seconds
pace(10, 20);
// with a java.time.Duration
pace(Duration.ofMillis(100), Duration.ofMillis(200));
// with a Gatling EL strings
pace("#{min}", "#{max}");
// with a function that returns a java.time.Duration
pace(session -> Duration.ofMillis(100), session -> Duration.ofMillis(200));

// with a number of seconds
pace(10, 20)
// with a java.time.Duration
pace(Duration.ofMillis(100), Duration.ofMillis(200))
// with a Gatling EL strings
pace("#{min}", "#{max}")
// with a function that returns a java.time.Duration
pace({ session -> Duration.ofMillis(100) }) { session -> Duration.ofMillis(200) }

// with a number of seconds
pace(10, 20)
// with a java.time.Duration
pace(100.millis, 200.millis)
// with a Gatling EL strings
pace("#{min}", "#{max}")
// with a function that returns a scala.concurrent.duration.FiniteDuration
pace(session => 100.millis, session => 200.millis)

`rendezVous`

In some cases, you may want to run some requests, then pause users until all other users have reached a rendez-vous point.

It takes a single parameter:

users: the number of users to wait before lifting the waiting point, an int

rendezVous(100);

rendezVous(100)

rendezVous(100)

Loop statements

When using the counterName parameter to force the loop index attribute name, be careful to use it in a read-only way. Otherwise, you might break the Gatling underlying component’s internal logic.

`repeat`

Repeat the loop a specified amount of times.

It takes 2 parameters:

times: the number of times to repeat the loop content, can be an int, a Gatling EL String or a function
counterName (optional): the key to store the loop counter in the Session, starting at 0

// with an Int times
repeat(5).on(
  http("name").get("/")
);
// with a Gatling EL string resolving an Int
repeat("#{times}").on(
  http("name").get("/")
);
// with a function times
repeat(session -> 5).on(
  http("name").get("/")
);
// with a counter name
repeat(5, "counter").on(
  http("name").get("/?counter=#{counter}")
);
// iterating over multiple actions sequentially
repeat(5).on(
  http("name1").get("/"),
  http("name2").get("/")
);

// with an Int times
repeat(5).on(
  http("name").get("/")
)
// with a Gatling EL string resolving an Int
repeat("#{times}").on(
  http("name").get("/")
)
// with a function times
repeat { session -> 5 }.on(
  http("name").get("/")
)
// with a counter name
repeat(5, "counter").on(
  http("name").get("/?counter=#{counter}")
)
// iterating over multiple actions
repeat(5).on(
  http("name1").get("/"),
  http("name2").get("/")
)

// with an Int times
repeat(5)(
  http("name").get("/")
)
// with a Gatling EL string resolving an Int
repeat("#{times}")(
  http("name").get("/")
)
// with a function times
repeat(session => 5)(
  http("name").get("/")
)
// with a counter name
repeat(5, "counter")(
  http("name").get("/?counter=#{counter}")
)
// iterating over multiple actions
repeat(5)(
  http("name1").get("/"),
  http("name2").get("/")
)

`foreach`

Repeat the loop for each element in the specified sequence.

It takes 3 parameters:

seq: the list of elements to iterate over, can be a List, a Gatling EL String or a function
elementName: the key to the current element in the Session
counterName (optional): the key to store the loop counter in the Session, starting at 0

// with a static List
foreach(List.of("elt1", "elt2"), "elt").on(
  http("name").get("/?elt=#{elt}")
);
// with a Gatling EL string
foreach("#{elts}", "elt").on(
  http("name").get("/?elt=#{elt}")
);
// with a function
foreach(session -> List.of("elt1", "elt2"), "elt").on(
  http("name").get("/?elt=#{elt}")
);
// with a counter name
foreach(List.of("elt1", "elt2"), "elt", "counter").on(
  http("name").get("/?elt=#{elt}&counter=#{counter}")
);
// iterating over multiple actions sequentially
foreach(List.of("elt1", "elt2"), "elt").on(
  http("name1").get("/?elt=#{elt}"),
  http("name2").get("/?elt=#{elt}")
);

// with a static List
foreach(listOf("elt1", "elt2"), "elt").on(
  http("name").get("/?elt=#{elt}")
)
// with a Gatling EL string
foreach("#{elts}", "elt").on(
  http("name").get("/?elt=#{elt}")
)
// with a function
foreach({ session -> listOf("elt1", "elt2") }, "elt").on(
  http("name").get("/?elt=#{elt}")
)
// with a counter name
foreach(listOf("elt1", "elt2"), "elt", "counter").on(
  http("name").get("/?elt=#{elt}&counter=#{counter}")
)
// iterating over multiple actions
foreach(listOf("elt1", "elt2"), "elt").on(
  http("name1").get("/?elt=#{elt}"),
  http("name2").get("/?elt=#{elt}")
)

// with a static Seq
foreach(Seq("elt1", "elt2"), "elt")(
  http("name").get("/?elt=#{elt}")
)
// with a Gatling EL string
foreach("#{elts}", "elt")(
  http("name").get("/?elt=#{elt}")
)
// with a function
foreach(session => Seq("elt1", "elt2"), "elt")(
  http("name").get("/?elt=#{elt}")
)
// with a counter name
foreach(Seq("elt1", "elt2"), "elt", "counter")(
  http("name").get("/?elt=#{elt}&counter=#{counter}")
)
// iterating over multiple actions
foreach(Seq("elt1", "elt2"), "elt")(
  http("name1").get("/?elt=#{elt}"),
  http("name2").get("/?elt=#{elt}")
)

`during`

Iterate over the loop during the specified amount of time.

It takes 3 parameters:

duration: can be an Int for a duration in seconds, a duration, a Gatling EL String or a function
counterName (optional): the key to store the loop counter in the Session, starting at 0
exitASAP (optional, default true): if true, the condition will be evaluated for each element inside the loop, possibly causing to exit the loop before reaching the end of the iteration.

// with a duration in seconds
during(5).on(
  http("name").get("/")
);
// with a java.time.Duration
during(Duration.ofMinutes(10)).on(
  http("name").get("/")
);
// with a Gatling EL string resolving a duration
during("#{times}").on(
  http("name").get("/")
);
// with a function times
during(session -> Duration.ofMinutes(10)).on(
  http("name").get("/")
);
// with a counter name
during(5, "counter").on(
  http("name").get("/?counter=#{counter}")
);
// with exitASAP
during(5, "counter", false).on(
  http("name").get("/?counter=#{counter}")
);
// iterating over multiple actions sequentially
during(5).on(
  http("name1").get("/"),
  http("name2").get("/")
);

// with a duration in seconds
during(5).on(
  http("name").get("/")
)
// with a java.time.Duration
during(Duration.ofMinutes(10)).on(
  http("name").get("/")
)
// with a Gatling EL string resolving a duration
during("#{times}").on(
  http("name").get("/")
)
// with a function times
during { session -> Duration.ofMinutes(10) }.on(
  http("name").get("/")
)
// with a counter name
during(5, "counter").on(
  http("name").get("/?counter=#{counter}")
)
// with exitASAP
during(5, "counter", false).on(
  http("name").get("/?counter=#{counter}")
)
// iterating over multiple actions
during(5).on(
  http("name1").get("/"),
  http("name2").get("/")
)

// with a duration in seconds
during(5)(
  http("name").get("/")
)
// with a java.time.Duration
during(10.minutes)(
  http("name").get("/")
)
// with a Gatling EL string resolving a duration
during("#{times}")(
  http("name").get("/")
)
// with a function times
during(session => 10.minutes)(
  http("name").get("/")
)
// with a counter name
during(5, "counter")(
  http("name").get("/?counter=#{counter}")
)
// with exitASAP
during(5, "counter", false)(
  http("name").get("/?counter=#{counter}")
)

`asLongAs`

Iterate over the loop as long as the condition is satisfied.

It takes 3 parameters:

condition: can be a boolean, a Gatling EL String resolving a boolean or a function
counterName (optional): the key to store the loop counter in the Session, starting at 0
exitASAP (optional, default true): if true, the condition will be evaluated for each element inside the loop, possibly causing to exit the loop before reaching the end of the iteration.

// with a Gatling EL string resolving to a boolean
asLongAs("#{condition}").on(
  http("name").get("/")
);
// with a function
asLongAs(session -> session.getBoolean("condition")).on(
  http("name").get("/")
);
// with a counter name and exitASAP
asLongAs("#{condition}", "counter", false).on(
  http("name").get("/?counter=#{counter}")
);
// iterating over multiple actions sequentially
asLongAs("#{condition}").on(
  http("name1").get("/"),
  http("name2").get("/")
);

// with a Gatling EL string resolving to a boolean
asLongAs("#{condition}").on(
  http("name").get("/")
)
// with a function
asLongAs { session -> session.getBoolean("condition") }.on(
  http("name").get("/")
)
// with a counter name and exitASAP
asLongAs("#{condition}", "counter", false).on(
  http("name").get("/?counter=#{counter}")
)
// iterating over multiple actions
asLongAs("#{condition}").on(
  http("name1").get("/"),
  http("name2").get("/")
)

// with a Gatling EL string resolving a boolean
asLongAs("#{condition}")(
  http("name").get("/")
)
// with a function
asLongAs(session => session("condition").as[Boolean])(
  http("name").get("/")
)
// with a counter name and exitASAP
asLongAs("#{condition}", "counter", false)(
  http("name").get("/?counter=#{counter}")
)

`doWhile`

Similar to asLongAs but the condition is evaluated after the loop.

It takes 2 parameters:

condition can be a boolean, a Gatling EL String resolving a boolean or a function
counterName (optional): the key to store the loop counter in the Session, starting at 0

// with a Gatling EL string resolving to a boolean
doWhile("#{condition}").on(
  http("name").get("/")
);
// with a function
doWhile(session -> session.getBoolean("condition")).on(
  http("name").get("/")
);
// with a counter name
doWhile("#{condition}", "counter").on(
  http("name").get("/?counter=#{counter}")
);
// iterating over multiple actions
doWhile("#{condition}").on(
  http("name1").get("/"),
  http("name2").get("/")
);

// with a Gatling EL string resolving to a boolean
doWhile("#{condition}").on(
  http("name").get("/")
)
// with a function
doWhile { session -> session.getBoolean("condition") }.on(
  http("name").get("/")
)
// with a counter name
doWhile("#{condition}", "counter").on(
  http("name").get("/?counter=#{counter}")
)
// iterating over multiple actions
doWhile("#{condition}").on(
  http("name1").get("/"),
  http("name2").get("/")
)

// with a Gatling EL string resolving to a boolean
doWhile("#{condition}")(
  http("name").get("/")
)
// with a function
doWhile(session => session("condition").as[Boolean])(
  http("name").get("/")
)
// with a counter name
doWhile("#{condition}", "counter")(
  http("name").get("/?counter=#{counter}")
)

`asLongAsDuring`

Iterate over the loop as long as the condition is satisfied and the duration hasn’t been reached.

It takes 4 parameters:

condition can be a boolean, a Gatling EL String resolving a boolean or a function
duration can be an Int for a duration in seconds, a duration, a Gatling EL String or a function
counterName (optional): the key to store the loop counter in the Session, starting at 0
exitASAP (optional, default true). If true, the condition will be evaluated for each element inside the loop, possibly causing to exit the loop before reaching the end of the iteration.

// with a Gatling EL string resolving to a boolean and an int duration
asLongAsDuring("#{condition}", 5).on(
  http("name").get("/")
);
// with a counter name and exitASAP
asLongAsDuring(session -> true, Duration.ofMinutes(10), "counter", false).on(
  http("name").get("/?counter=#{counter}")
);
// iterating over multiple actions
asLongAsDuring("#{condition}", 5).on(
  http("name1").get("/"),
  http("name2").get("/")
);

// with a Gatling EL string resolving to a boolean and an int duration
asLongAsDuring("#{condition}", 5).on(
  http("name").get("/")
)
// with a counter name and exitASAP
asLongAsDuring({ session -> true }, Duration.ofMinutes(10), "counter", false).on(
  http("name").get("/?counter=#{counter}")
)
// iterating over multiple actions
asLongAsDuring("#{condition}", 5).on(
  http("name1").get("/"),
  http("name2").get("/")
)

// with a Gatling EL string resolving to a boolean and an int duration
asLongAsDuring("#{condition}", 5)(
  http("name").get("/")
)
// with a counter name and exitASAP
asLongAsDuring(session => true, 10.minutes, "counter", false)(
  http("name").get("/?counter=#{counter}")
)

`doWhileDuring`

Similar to asLongAsDuring but the condition is evaluated after the loop.

It takes 3 parameters:

condition can be a boolean, a Gatling EL String resolving a boolean or a function
duration can be an Int for a duration in seconds, a duration, a Gatling EL String or a function
counterName (optional): the key to store the loop counter in the Session, starting at 0

// with a Gatling EL string resolving to a boolean and an int duration
doWhileDuring("#{condition}", 5).on(
  http("name").get("/")
);
// with a counter name and exitASAP
doWhileDuring(session -> true, Duration.ofMinutes(10), "counter", false).on(
  http("name").get("/?counter=#{counter}")
);
// iterating over multiple actions sequentially
doWhileDuring("#{condition}", 5).on(
  http("name1").get("/"),
  http("name2").get("/")
);

// with a Gatling EL string resolving to a boolean and an int duration
doWhileDuring("#{condition}", 5).on(
  http("name").get("/")
)
// with a counter name and exitASAP
doWhileDuring({ session -> true }, Duration.ofMinutes(10), "counter", false).on(
  http("name").get("/?counter=#{counter}")
)
// iterating over multiple actions
doWhileDuring("#{condition}", 5).on(
  http("name1").get("/"),
  http("name2").get("/")
)

// with a Gatling EL string resolving to a boolean and an int duration
doWhileDuring("#{condition}", 5)(
  http("name").get("/")
)
// with a counter name and exitASAP
doWhileDuring(session => true, 10.minutes, "counter", false)(
  http("name").get("/?counter=#{counter}")
)

`forever`

Iterate over the loop content forever.

forever().on(
  http("name").get("/")
);
// with a counter name
forever("counter").on(
  http("name").get("/?counter=#{counter}")
);
// iterating over multiple actions sequentially
forever().on(
  http("name1").get("/"),
  http("name2").get("/")
);

forever().on(
  http("name").get("/")
)
// with a counter name
forever("counter").on(
  http("name").get("/")
)
// iterating over multiple actions
forever().on(
  http("name1").get("/"),
  http("name2").get("/")
)

forever(
  http("name").get("/")
)
// with a counter name
forever("counter")(
  http("name").get("/?counter=#{counter}")
)

counterName is optional.

Conditional statements

Gatling’s DSL has conditional execution support.

`doIf`

Used to execute a specific chain of actions only when some condition is satisfied.

It takes one single parameter:

condition can be a boolean, a Gatling EL String resolving a boolean or a function

// with a Gatling EL string resolving to a boolean
doIf("#{condition}").then(
  http("name").get("/")
);
// with a function
doIf(session -> session.getBoolean("condition")).then(
  http("name").get("/")
);
// executing multiple actions
doIf("#{condition}").then(
  http("name1").get("/"),
  http("name2").get("/")
);

// with a Gatling EL string resolving to a boolean
doIf("#{condition}").then(
  http("name").get("/")
)
// with a function
doIf { session -> session.getBoolean("condition") }.then(
  http("name").get("/")
)
// executing multiple actions
doIf("#{condition}").then(
  http("name1").get("/"),
  http("name2").get("/")
)

// with a Gatling EL string resolving to a boolean
doIf("#{condition}")(
  http("name").get("/")
)
// with a function
doIf(session => session("condition").as[Boolean])(
  http("name").get("/")
)

`doIfEquals`

If your test condition is simply to compare two values, you can simply use doIfEquals:

It takes 2 parameters:

actual can be a static value, a Gatling EL String or a function
expected can be a static value, a Gatling EL String or a function

doIfEquals("#{actual}", "expectedValue").then(
  // executed if the session value stored in "actual" is equal to "expectedValue"
  http("name").get("/")
);

doIfEquals("#{actual}", "expectedValue").then(
  // executed if the session value stored in "actual" is equal to "expectedValue"
  http("name").get("/")
)

doIfEquals("#{actual}", "expectedValue")(
  // executed if the session value stored in "actual" is equal to "expectedValue"
  http("name").get("/")
)

`doIfOrElse`

Similar to doIf, but with a fallback if the condition evaluates to false.

It takes one single parameter:

condition can be a boolean, a Gatling EL String resolving a boolean or a function

doIfOrElse("#{condition}").then(
  http("name").get("/")
).orElse(
  http("else").get("/")
);

doIfOrElse("#{condition}").then(
  http("name").get("/")
).orElse(
  http("else").get("/")
)

doIfOrElse("#{condition}")(
  http("name").get("/")
)(
  http("else").get("/")
)

`doIfEqualsOrElse`

Similar to doIfEquals but with a fallback if the condition evaluates to false.

It takes 2 parameters:

actual can be a static value, a Gatling EL String or a function
expected can be a static value, a Gatling EL String or a function

doIfEqualsOrElse("#{actual}", "expectedValue").then(
  // executed if the session value stored in "actual" equals to "expectedValue"
  http("name").get("/")
).orElse(
  // executed if the session value stored in "actual" is not equal to "expectedValue"
  http("else").get("/")
);

doIfEqualsOrElse("#{actual}", "expectedValue").then(
  // executed if the session value stored in "actual" equals to "expectedValue"
  http("name").get("/")
).orElse(
  // executed if the session value stored in "actual" is not equal to "expectedValue"
  http("else").get("/")
)

doIfEqualsOrElse("#{actual}", "expectedValue")(
  // executed if the session value stored in "actual" equals to "expectedValue"
  http("name").get("/")
)(
  // executed if the session value stored in "actual" is not equal to "expectedValue"
  http("else").get("/")
)

`doSwitch`

Add a switch in the chain. Every possible sub-chain is defined with a key. Switch is selected through the matching of a key with the evaluation of the passed expression. If no switch is selected, the switch is bypassed.

doSwitch("#{myKey}").on(
  onCase("foo").then(http("name1").get("/foo")),
  onCase("bar").then(http("name2").get("/bar"))
);

doSwitch("#{myKey}").on(
  onCase("foo").then(http("name1").get("/foo")),
  onCase("bar").then(http("name2").get("/bar"))
)

doSwitch("#{myKey}")( // beware: use parentheses, not curly braces!
  "foo" -> exec(http("name1").get("/foo")),
  "bar" -> http("name2").get("/bar")
)

`doSwitchOrElse`

Similar to doSwitch, but with a fallback if no switch is selected.

doSwitchOrElse("#{myKey}").on(
  onCase("foo").then(http("name1").get("/foo")),
  onCase("bar").then(http("name2").get("/bar"))
).orElse(
  http("name3").get("/baz")
);

doSwitchOrElse("#{myKey}").on(
  onCase("foo").then(http("name1").get("/foo")),
  onCase("bar").then(http("name2").get("/bar"))
).orElse(
  http("name3").get("/baz")
)

doSwitchOrElse("#{myKey}")( // beware: use parentheses, not curly braces!
  "foo" -> http("name1").get("/foo"),
  "bar" -> http("name2").get("/bar")
)(
  exec(http("name3").get("/baz"))
)

`randomSwitch`

randomSwitch can be used to emulate simple Markov chains. Simple means cyclic graphs are not currently supported.

randomSwitch().on(
  percent(60.0).then(http("name1").get("/foo")),
  percent(40.0).then(http("name2").get("/bar"))
);

randomSwitch().on(
  percent(60.0).then(http("name1").get("/foo")),
  percent(40.0).then(http("name2").get("/bar"))
)

randomSwitch( // beware: use parentheses, not curly braces!
  60.0 -> http("name1").get("/foo"),
  40.0 -> http("name2").get("/bar")
)

Percentages sum can’t exceed 100%. If sum is less than 100%, users that won’t fall into one of the chains will simply exit the switch and continue. Once users are done with the switch, they simply continue with the rest of the scenario.

Percentages should be formatted as following: 50% -> 50, 33.3% -> 33.3 and so on.

`randomSwitchOrElse`

Similar to randomSwitch, but with a fallback if no switch is selected (i.e.: random number exceeds percentages sum).

randomSwitchOrElse().on(
  percent(60.0).then(http("name1").get("/foo")),
  percent(20.0).then(http("name2").get("/bar"))
).orElse(
  http("name3").get("/baz")
);

randomSwitchOrElse().on(
  percent(60.0).then(http("name1").get("/foo")),
  percent(20.0).then(http("name2").get("/bar"))
).orElse(
  http("name3").get("/baz")
)

randomSwitchOrElse( // beware: use parentheses, not curly braces!
  60.0 -> http("name1").get("/foo"),
  20.0 -> http("name2").get("/bar")
)(
  http("name3").get("/baz")
)

`uniformRandomSwitch`

Similar to randomSwitch, but with an uniform distribution amongst chains.

uniformRandomSwitch().on(
  http("name1").get("/foo"),
  http("name2").get("/bar")
);

uniformRandomSwitch().on(
  http("name1").get("/foo"),
  http("name2").get("/bar")
)

uniformRandomSwitch( // beware: use parentheses, not curly braces!
  http("name1").get("/foo"),
  http("name2").get("/bar")
)

`roundRobinSwitch`

Similar to randomSwitch, but dispatch uses a round-robin strategy.

roundRobinSwitch().on(
  http("name1").get("/foo"),
  http("name2").get("/bar")
);

roundRobinSwitch().on(
  http("name1").get("/foo"),
  http("name2").get("/bar")
)

roundRobinSwitch( // beware: use parentheses, not curly braces!
  http("name1").get("/foo"),
  http("name2").get("/bar")
)

Errors handling

`tryMax`

Any error (a technical exception such as a timeout, or a failed check) in the wrapped chain would cause the virtual user to interrupt and start over from the beginning, up to a maximum number of times. All requests performed in failing iterations will be logged, including the failing one.

It takes 2 parameters:

times: the maximum number of attempts, an int
counterName (optional): the key to store the loop counter in the Session, starting at 0

tryMax(5).on(
  http("name").get("/")
);

// with a counter name
tryMax(5, "counter").on(
  http("name").get("/")
);

tryMax(5).on(
  http("name").get("/")
)

// with a counter name
tryMax(5, "counter").on(
  http("name").get("/")
)

tryMax(5)(
  http("name").get("/"),
  http("name").get("/")
)

// with a counter name
tryMax(5, "counter")(
  http("name").get("/")
)

`exitBlockOnFail`

Similar to tryMax, but without retrying on failure.

exitBlockOnFail().on(
  http("name").get("/")
);

exitBlockOnFail().on(
  http("name").get("/")
)

exitBlockOnFail(
  http("name").get("/")
)

`exitHere`

Make the user exit the scenario from this point.

exitHere();

exitHere()

exitHere

`exitHereIf`

Make the user exit the scenario from this point if the condition holds.

It takes one single parameter:

condition: can be a boolean, a Gatling EL String resolving a boolean or a function

exitHereIf("#{myBoolean}");
exitHereIf(session -> true);

exitHereIf("#{myBoolean}")
exitHereIf { session -> true }

exitHereIf("#{condition}")
exitHereIf(session => true)

`exitHereIfFailed`

Make the user exit the scenario from this point if it previously had an error.

exitHereIfFailed();

exitHereIfFailed()

exitHereIfFailed

`stopInjector`

Make the user exit abruptly stop the injector.

It takes one single parameter:

message: can be a static String, a Gatling EL String resolving a String or a function, used to log an ERROR message

stopInjector("#{someErrorMessage}");
stopInjector(session -> "someErrorMessage");

stopInjector("#{someErrorMessage}")
stopInjector { session -> "someErrorMessage"}

stopInjector("#{someErrorMessage}")
stopInjector(session => "someErrorMessage")

`stopInjectorIf`

Make the user exit abruptly stop the injector.

It takes 2 parameters:

message: can be a static String, a Gatling EL String resolving a String or a function, used to log an ERROR message
condition: can be a boolean, a Gatling EL String resolving a boolean or a function

stopInjectorIf("#{someErrorMessage}", "#{condition}");
stopInjectorIf(session -> "someErrorMessage", session -> true);

stopInjectorIf("#{someErrorMessage}", "#{condition}")
stopInjectorIf( { session -> "someErrorMessage"}, { session -> true })

stopInjectorIf("#{someErrorMessage}", "#{condition}")
stopInjectorIf(session => "someErrorMessage", session => true)

Groups

Create a group of requests to model processes or requests in the same page. Groups can be nested.

group("foo").on(
  exec(http("name").get("/"))
);

group("foo").on(
  exec(http("name").get("/"))
)

group("foo")(
  exec(http("name").get("/"))
)

Beware that group names mustn’t contain commas.

Edit this page on GitHub

Scenario

Bootstrapping#

Structure Elements#

Exec#

Pause#

pause#

pace#

rendezVous#

Loop statements#

repeat#

foreach#

during#

asLongAs#

doWhile#

asLongAsDuring#

doWhileDuring#

forever#

Conditional statements#

doIf#

doIfEquals#

doIfOrElse#

doIfEqualsOrElse#

doSwitch#

doSwitchOrElse#

randomSwitch#

randomSwitchOrElse#

uniformRandomSwitch#

roundRobinSwitch#

Errors handling#

tryMax#

exitBlockOnFail#

exitHere#

exitHereIf#

exitHereIfFailed#

stopInjector#

stopInjectorIf#

Groups#

Bootstrapping

Structure Elements

Exec

Pause

`pause`

`pace`

`rendezVous`

Loop statements

`repeat`

`foreach`

`during`

`asLongAs`

`doWhile`

`asLongAsDuring`

`doWhileDuring`

`forever`

Conditional statements

`doIf`

`doIfEquals`

`doIfOrElse`

`doIfEqualsOrElse`

`doSwitch`

`doSwitchOrElse`

`randomSwitch`

`randomSwitchOrElse`

`uniformRandomSwitch`

`roundRobinSwitch`

Errors handling

`tryMax`

`exitBlockOnFail`

`exitHere`

`exitHereIf`

`exitHereIfFailed`

`stopInjector`

`stopInjectorIf`

Groups